home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BBS Toolkit
/
BBS Toolkit.iso
/
pc_board
/
adlg17b.zip
/
ADLOGO.NEW
< prev
next >
Wrap
Text File
|
1992-02-17
|
11KB
|
248 lines
AdLogo - History File
In reverse order.....
02/17/92 - 20:24
--------
AdLogo v1.7ß Enhanced Version
-- Complaint of 'File not found' error with version 1.6ß when
running under COMPAQ DOS v3.3 where PKZip was trying to add
the Logo to the ZIP file located in the TEMP directory--FIXED
-- Released as ADLG17B.ZIP
02/17/92 - 01-23
--------
AdLogo v1.6ß Enhanced Version
-- Changed the format of the Batch File Status window to a more
formatted display.
-- Added 'Total Files Processed - n' to the Batch Transfer Status
window.
-- Fixed bug when a Single File Transfer was taking place and
the file to be downloaded was NOT in a ZIP format the cursor
positioning was incorrect and would add linefeeds thus making
the Status Window un-readable.
-- On some systems it has been reported that the screen writes
get all messed up. This is not a problem in AdLogo, but the
way DOS handles it's info when output is redirected to NUL.
To fix this problem, simply change the LOCK LINES settings
in PCBSetup, File Locatations #2, Protocol Data File for all
the external protocol that you have AdLogo install in to 'N'.
-- Added a file to the archive called BATCH.PMT. This is a file
that you can have echoed to the user online right before
PCBoard shell's out to the external protocol. This file
contains PCBoard's @X color codes that simply states that the
batch mode file transfer may take upto 1 minute before
starting. To add this in to PCBoard, change to your direcory
that contains the file PCBTEXT (usually C:\PCB\GEN) and
execute MKTXT145 as follows:
C:\PCB\GEN\> MKTXT145 PCBTEXT <enter>
Press <F3> and then enter the number 496 <enter>
Change that line to %<DRIVE><PATH>BATCH.PMT
Where <DRIVE> is the drive letter where you had
placed the file BATCH.PMT and <PATH> is the DOS
path to the file.
(ie: You placed the file BATCH.PMT into you C:\PCB\GEN
directory, the line would look like this:
%C:\PCB\GEN\BATCH.PMT
Press <ESC> to save the changes made.
NOTE: If you have PCBoard load the PCBTEXT file (set via
PCBSetup, Options #1), you will need to cycle PCBoard one
time before the changes will take effect.
-- Well, we're gonna let this version fly for a while.. Want to
get working on the code that will echo to user online what
you as the Sysop will see in the File Status Window so that
the user will know what is going on and why the transfer
hasn't started within 5 seconds.
-- Just to keep you up-to-date on what our future additions list
is adding support for .ARJ format, and for those boards that
are big into .GIFs, adding support for adding your ad to a
.GIF file(s) before sending! Please report any bugs, problems
or incompatablilty problems that you incountering. Would like
to set March 1st, 1992 as the release date of the official
release of AdLogo v1.0.
-- Also in the process of adding code to ADLSETUP that will
automatically create the TEMP directories for all nodes.
This may not be a problem to most Sysops, having to manually
create a TEMP directory for each node, however for those that
are running systems bigger than 10 nodes, this could really
be hard on the 'ol fingures! <grin>
-- Released as ADLG16B.ZIP
02/16/92 - 04:51
--------
AdLogo v1.5ß Enhanced Version
-- Fixed bug that would incorrectly read the passcode from the
ADLOGO.CFG file.
-- Changed format of ADLOGO.CFG file. Line 3 USED to be the
PassCode line. PassCode line is NOW LINE 8 and all others
move up one. (ie Line 4 is now Line 3, etc...)
-- Now packaged in the archive file is a utility called
ADLSETUP.EXE. This simple util will create the ADLOGO.CFG
file automatically. Simply run this util in the directory
you want your ADLOGO.CFG file to be placed in. ADLOGO.CFG
can still be edited with a text editor, but created ADLSETUP
to follow the new .CFG file format stated above.
-- Enahanced Version! Completely re-wrote the code for the screen
output. All screen writes are done via the Video BIOS. No
DIRECT screen writes are in the code. Using the BIOS, there
should be no problems with 'bleed-through' for those running
under multi-tasking enviroments such as DESQview, DoubleDOS,
etc...
-- Just for your information, AdLogo is currently being tested on
a 386sx-16mhz running under DESQview v2.41 with QEMM v6.01
(stealth enabled, mapping mode) for a 3 node PCBoard v14.5a/E3
system and a 386-16mhz running under LANtastic with PCBoard
14.5a/E3 for a two node system (Node 2 is an 8088).
-- Released as ADLG15B.ZIP
02/13/92 - 01:55
--------
AdLogo v1.4ß
-- AdLogo now reads the permenent parameters from a configuration
file. New Syntax for AdLogo is:
AdLogo <CFGFILE> %NODE% %3
<CFGFILE> is the full pathlist and name of AdLogo's
configuration file. (ie: C:\PCB\ADLOGO.CFG)
(%NODE% & %3 are still the same)
A sample .CFG file is included in the archive. The file format
is as follows:
Line 1 - Your Name (32 chars max)
Line 2 - Serial # (00000 if UNREGISTERED)
Line 3 - PassCode (0000000000 if UNREGISTERED)
Line 4 - CD-ROM (or Hard Drive) Drive Letters
Line 5 - TEMP directory
Line 6 - FULL Path & Filename of ZipComment (BBS LOGO)
Line 7 - FULL PAth and Filename of Callers Log file
(Do NOT Place a node number here if running
MultiNode!)
Line 8 - Y or N (Y=MultiNode System, N=Single Node)
The .CFG file is a simple TEXT file that can be created/edited
with a normal text editor such as QEdit.
-- More code removed to make screen display more clear and easier
to read.
-- Change the filename of the registration form from REGISTER.TXT
to REGISTER.FRM
-- Posted as ADLG14B.ZIP
02/12/92 - 16:31
--------
AdLogo v1.3ß
-- Boy did I really mess v1.2ßeta up!! All is fixed with
the fixes listed below.. Think I'll take a few days off
to get my eyes straight again! Sorry for any problems!
-- Bug fix. AdLogo was not correctly writing the new path
of a file processed during a Single File Transfer.
-- Fixed CR/LF on the opening screen
-- Posted as ADLG13B.ZIP
02/12/92 - 12:30
--------
AdLogo v1.2ß
-- Edited documentations to reflect added SET variable
Problem encountered when running under certain enviroments
DSZ was unable to locate ADLOGO.LST by the setup stated
in the docs. Must add a SET DRIVE=n in each BOARD.BAT file
where 'n' is the drive for that node. (ie: SET DRIVE=C:)
-- TMC Software Development and OTS Development Corp. are
working together to bring you AdLogo and future creations by
TMS Software Development. All files in ADLG???.ZIP will now
have the -AV Authenticity Verified code next to them, and
OTS Development Authenticity Verified statement at end of
the .ZIP file. If ANY file(s) do not have the -AV next to them,
DO NOT use any of the files in the archive and please report
such cases to any of the Support Boards listed in the manual
or call voice support between the hours of 8:00am-7:00pm,
Monday thru Friday Central Time.
-- Posted as ADLG12B.ZIP
02/12/92 - 01:23
--------
AdLogo v1.1ß
-- Removed all code that displayed every detail that AdLogo
was performing. This will help on systems with slow
screen writes and shorten the time it takes AdLogo to
execute.
-- Added logging to PCBoard's Callers Log. Two more commands
must now be passed on the AdLogo command line in the
PCBS?.BAT files. New format is:
AdLogo <CDROM> <TEMP> %NODE% <ZipComment> %3 <CALLERSLOG> <MULTINODE>
<CALLER> is the Full Path of your CALLERS log file
(ie: C:\PCB\MAIN\CALLER)
NOTE: To not add a node number to this!
<MULTINODE> is either the letter Y or N.
Y = Yes, you are running a multinode system
N = No, you are not running a multinode system
-- Added support for SHARE under Networks and Multitasking Systems
-- Released as ADLG11B.ZIP
02/09/92 - 23:19
--------
AdLogo v1.0ß
-- Initial Public release
-- Added code for .ZIP file checking. If a NON .ZIP file is
detected, AdLogo will not move the file(s) over to the temp
directory. Instead, will simply copy the ORIGINAL path of
the file over to ADLOGO.LST
-- Added Serial No.
-- Edited docs. Incorrectly stated the wrong syntax for DEL.
now stated properly as DEL N:\TEMP%PCBNODE%\.
^
(Was missing)
-- Released as ADLG10B.ZIP
02/09/92 - 19:31
--------
AdLogo v1.0ß2
-- Removed code not is use. (Code that was inserted for initial
testing purposes.) Not release.
02/08/92 - 17:38
--------
AdLogo v1.0ß1
-- Initial ßeta release. Fully functional for both single and
batch file transfers.